The micro USB slot is not only used for charging, but also for powering the light source, so you do not have to worry about battery drainage in long surgeries. Unlike the mechanical button switch that ruins with time in most portable light sources in the market, the. Smart portable LED light source features a Smart switch button and controller with LED indicator which allows for light intensity control and also gives data about battery charge level and charging status. Standard USB slot for using this light source as a power bank for emergency smartphone charging. The included battery is a genuine Panasonic.Battery made in Japan with a trusted capacity that lasts more than 3 hours according to light intensity used and long life span with more than 500 cycles of usage. Dimming circuit for optimal operating light intensity control. Smart circuit that stops charging when charging complete and stops the device when battery is almost empty, so attaining maximum battery protection with longer life span.
An accessory adapter for connecting Olympus endoscopes and also light cables with Olympus connection. Another accessory adapter for connecting light cables and headlights with Storz connection is also included. To expose the USB charging slot, rotate the head of the light source counter clockwise. The LED indicator of the button switch turns red when charging is in progress and turns blue when charging is complete.
Now you can disconnect the charger and start using the device. Connect the endoscope or light cable to the light source. The light will turn on with moderate intensity (this is the recommended intensity for most of examination and surgeries).Press the power button again within 2 seconds>. The light will turn to maximum intensity (this mode is ideal for short procedures that requires intense light).
Pressing the power button after 2 seconds from turning on will turn off the device. When the device is on in any of the above modes, long press the power button with start the dimming feature.Leave the button to keep the desired light intensity. Rapid 2 press will turn strobe feature on (beta). The LED indicator in the power button turns blue when battery is charged, red when it gets weak and flashes red when the battery is empty before the device turns off. For endoscopes with Storz adapter, please remove the adapter first, then connect the light source to the inner thread of the endoscope.
USB Output power: 5V 1A. Emitter BIN: T6 up to 10 W. Working Voltage: 3--4.2 V.
Lithium Ion battery, 18650, protected, 3400 ma. Panasonic - original, made in Japan.Actual Lumens: up to 1000 lumens. Run time: 3-5 Hours (depending on light intensity used).
Number of Modes: one press to boot at moderate intensity press again within 2 seconds gives maximum light - long press 2 seconds: 10%-100%. Quickly press the two times to enter strobe mode(beta).Switch Type: Smart touch switch with LED indicator. Dimensions: 13.5 cm x 2.6 cm. Weight: 134 g with battery inside. Portable LED light source (endoscope not included). 2-Accessory adapter for connecting Olympus endoscope and Olympus light cables. Accessory adapter for connecting light cables and headlights with Storz connection. Items usually takes 5 to 10 days to be delivered to most countries worldwide. International Buyers - Please Note. The item "ClaraMed Battery/USB powered Olympus Endoscope Smart LED light source S4" is in sale since Sunday, August 19, 2018. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Handpieces & Instruments\Endoscopes".
The seller is "mohamedguitarist" and is located in Cairo. This item can be shipped worldwide.